FixVault
Home › Subaru › 2018 › Outback 2.5i › Repair and Diagnosis › Body & Frame › Window Glass & Mirrors › Front Regulator And Motor Assembly › Installation

Front Regulator And Motor Assembly: Installation

  1. Install the regulator and motor assembly - front.

    Tightening torque: 

    7.5 N.m (0.8 kgf-m, 5.5 ft-lb)

  2. Install the glass assembly - front door. Ref. to GLASS/WINDOWS/MIRRORS>Front Door Glass>INSTALLATION .
  3. Install the sealing cover - front door.
  4. Install the trim panel - front door. Ref. to EXTERIOR/INTERIOR TRIM>Door Trim>INSTALLATION .
  5. Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
About FixVault