FixVault
Home › Subaru › 2018 › Outback 2.5i › Repair and Diagnosis › Transmission › Automatic Trans › CVT Transaxle (Tr580) › Transfer Driven Gear › Installation

Transfer Driven Gear: Installation

  1. Install the seal ring to the transfer driven gear assembly.
    NOTE:
    • Install a new seal ring.
    • When installing the seal rings, do not expand the seal rings too much.
    • Apply CVTF to the seal rings.
    G08317901Courtesy of SUBARU OF AMERICA, INC.
  2. Install the transfer driven gear assembly.
    G10218727Courtesy of SUBARU OF AMERICA, INC.
  3. Install the transfer clutch assembly. Ref. to CONTINUOUSLY VARIABLE TRANSMISSION(TR580)>Transfer Clutch>INSTALLATION .
  4. Select the transfer driven gear shim. Ref. to CONTINUOUSLY VARIABLE TRANSMISSION(TR580)>Transfer Clutch>ADJUSTMENT .
  5. Install the extension case. Ref. to CONTINUOUSLY VARIABLE TRANSMISSION(TR580)>Extension Case>INSTALLATION .
  6. Install the transmission assembly. Ref. to CONTINUOUSLY VARIABLE TRANSMISSION(TR580)>Automatic Transmission Assembly>INSTALLATION .
About FixVault