Extension Case: Disassembly
- Remove the transfer drive gear. Refer to MANUAL TRANSMISSION AND DIFFERENTIAL(6MT) (TY85)>TRANSFER DRIVE GEAR>REMOVAL .
- Remove the oil guide.
- Remove the shift bracket.
- Using the ST, remove the taper roller bearing (extension case side) outer race.
ST 18758AA000 PULLER
- Remove the adjusting washer and oil plate.
- Remove the shifter arm oil seal.
- Remove the reverse check system. Refer to MANUAL TRANSMISSION AND DIFFERENTIAL(6MT) (TY85)>REVERSE CHECK SYSTEM>REMOVAL .
- Remove the extension case oil seal. Refer to MANUAL TRANSMISSION AND DIFFERENTIAL(6MT) (TY85)>OIL SEAL>REPLACEMENT .