Primary Speed Sensor: Installation

CAUTION: If water or oil contacts the connector terminal of primary speed sensor, replace it with a new part.

Install a new O-ring to the primary speed sensor.
NOTE: Apply CVTF to the O-rings.
Install the primary speed sensor.
1. Install the primary speed sensor.
  Tightening torque:
  
  7 N.m (0.7 kgf-m, 5.2 ft-lb)
2. Connect the connector.
Install the transmission body. Ref. to CONTINUOUSLY VARIABLE TRANSMISSION (TR580)>TRANSMISSION ASSEMBLY>INSTALLATION .
Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .