Floor Shift Parking Lock Cable Assembly: Installation

1. Turn the ignition switch ACC or ON.
2. Connect the cable to the upper bracket.
   Fig 1: Identifying Upper Bracket

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Connect the cable clamp.
4. Shift the shift lever to N position.
   Fig 2: Identifying Cable Clamp

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
5. Using a screwdriver, unlock the claw of the lock key of automatic adjustment part.
   Fig 3: Unlocking Claw Of Lock Key

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
6. Pass the parking lock cable through the hole of shift lever plate.
7. Insert the slide cap into the shift lever plate.
   Fig 4: Identifying Slide Cap

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
8. Apply MP grease to the shift lock release link.
9. Insert the lever pin into the hole in the cable end.
   Fig 5: Identifying Shift Lock Release Link

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
10. Lock the lock key.

    HINT:

    At this time, the shift lever should be in N position and the ignition key should be set to ACC or ON.

Fig 6: Locking Lock Key
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

HINT:

(See INSTALLATION )

HINT:

(See INSTALLATION )

HINT:

(See INSTALLATION )

HINT:

(See INSTALLATION )

HINT:

(See ON-VEHICLE INSPECTION  )