Servicing - Fwd (Aw50-42)

• Identification
• Checking Oil Level
  • Conditions
    • Oil Level Temperature Information
  • Preparations
    • Notes
    • Move The Gear Selector Through All Positions, Stopping In Each Position For Approx. 3 Seconds
    • Low Level (Topping Up)
      • Top Up With Oil Through The Dipstick Pipe
    • High Level (Overfilling)
    • Drain Off Oil
• Oil, Quality Check
  • Check The Oil
    • Notes
    • Discolored or burnt smell?
    • Is There Water In The Oil (Gray Discoloration)?
• Oil, Changing
  • Notes
  • Conditions
    • Notes
    • Draining The Transmission
    • Draining The Oil Cooler
    • Refilling
    • Filling, Continued
    • Check
    • Erasing Diagnostic Trouble Codes (DTCs)
• Adjustments
  • Adjusting Gear Selector Cable
    • Preparations
    • Removing
    • Disconnecting Transmission Cable
    • Adjusting The Transmission Cable
      • Move The Gear Selector To Position R
        • Notes
        • Setting R Position
    • Installing The Gear Selector Cable
    • Check
    • Finishing
      • Installing Components
  • Gear-Shift Position Sensor, Checking & Adjusting
    • Special Tools
    • Preparations
      • Preparations, Removing
    • Checking & Adjusting Gear-Shift Position Sensor
      • Check
    • Adjustment
    • Installing Components
    • Checking Diagnostic Trouble Codes (DTCs)
  • Checking Engagement Time
    • Notes
    • Preparations
    • Measuring Engagement Time From N To D
    • Measuring Engagement Time From N To R
    • Engagement Time Too Long
  • Checking Manual Shifting
    • Disconnecting Control Module
    • Check
    • Incorrect Result
• Removal & Installation
  • Accumulator Pistons/Sealing Rings B2/C2, Replacing
    • Special Tools
    • Opening Control System
    • Information For Work With Valves & Pistons
      • Removing Sticking Valves & Pistons
    • Inspection After Disassembly
    • Measurement/Inspection Of Springs
    • Preparations
    • Inspection & Replacement
      • Replacing Accumulator Pistons & Sealing Rings B2/C2
    • Clean & Inspect Valves & Pistons
    • Accumulator Piston & Valve Spring Specifications
    • Replacing Accumulator Piston Sealing Rings
    • Reinstall Accumulator Pistons & Springs
    • Reinstalling Control System
    • Filling & Checking Oil
    • Checking Diagnostic Trouble Codes (DTCs)
  • Accumulator Pistons/Sealing Rings C3, Replacing
    • Special Tools
    • Opening Control System
    • Information For Work With Valves & Pistons
    • Replacing Accumulator Piston C3
    • Clean & Inspect Valves & Pistons
    • Accumulator Piston & Valve Spring Specifications
    • Replace Accumulator Piston Sealing Rings
    • Reinstall Accumulator Piston & Spring
    • Reinstalling Control System
    • Filling & Checking Oil
    • Checking Diagnostic Trouble Codes (DTCs)
  • Cable Harness For The Solenoids, Inspecting/Replacing
    • Special Tools
    • Preparations
    • Preparations, Continued
    • Opening The Control System
    • Disconnecting Connections
    • Checking The Cable Harness
    • Removing The Gear-Shift Position Sensor
    • Removing The Cable Harness
    • Connecting The Cable Harness To The Control System
    • Installing The Cover
    • Connecting The Cable Harness
    • Installing/Adjusting The Gear Position Sensor
    • Installing Components
    • Installing Other Components
    • Filling & Checking Oil
    • Checking Diagnostic Trouble Codes (DTCs)
  • Control System, Replacing
    • Special Tools
    • Cleanliness
    • Opening Control System
      • Overview
      • Preparations
    • Disconnecting Connectors
    • Removing Control System
    • Reinstalling Control System
      • Installing Components
      • Reinstalling Control System
    • Cable Harness Connections
    • Sealing Cover
    • Installing Cover
    • Installing Other Components
    • Check
      • Filling & Checking Oil
    • Checking Diagnostic Trouble Codes (DTCs)
  • Drive Shaft Seal, Replacing (Left Side)
    • Special Tools
    • Preparations
    • Disconnecting Drive Shaft
    • Removing Components
    • Removing Left Drive Shaft From Transmission
    • Removing Sealing Ring
    • Installing Sealing Ring
    • Installing Drive Shaft (Left Side)
    • Installing Stub Axle, Brake Hose & ABS Line
    • Installing Splash Guards & Wheel
  • Drive Shaft Seal, Replacing (Right Side)
    • Special Tools
    • Installing Lifting Beam
    • Preparations
    • Remove Cover
    • Disconnecting Drive Shaft (Right Side)
    • Removing Components
    • Removing Right Drive Shaft From Transmission
    • Removing Sealing Ring
    • Installing Sealing Ring
    • Installing Right Drive Shaft
    • Install Cover
    • Installing Longitudinal Member
    • Installing Stub Axle, Brake Hose & ABS Line
    • Installing Splash Guards & Wheel
  • Engine Speed (Rpm) Sensor, Replacing
    • Preparations
    • Disconnecting The Transmission Cable & The Cable Harness
    • Installing Lifting Beams
    • Replacing The Sensor
    • Installing The Connector & The Transmission Cable
    • Installing Other Components
  • Gear Selector Assembly, Replacing
    • Removing Center Consoles
    • Removing Gear Selector Assembly
    • Installing Gear Selector Assembly & Transmission Cable
    • Installing Center Consoles
  • Gear Selector/Boot/Indicator Panel, Replacing
    • Preparations
    • Removing Gear Selector
    • Installing Gear Selector
    • Replacing Boot/Indicator Panel
    • Installing Gear Selector Assembly
  • Gear Selector Knob, Replacing
    • Removing Gear Selector Knob
    • Installing Gear Selector Knob & Boot
  • Gear-Shift Position Sensor, Replacing
    • Special Tools
    • Preparations
    • Removing The Gear-Shift Position Sensor
    • Installing, Adjusting & Checking
      • Installing The Gear-Shift Position Sensor
      • Adjusting & Checking
    • Installation, Continued
    • Installing Connectors/Cable Harnesses
    • Installing Engine Compartment Components
    • Checking Diagnostic Trouble Codes (DTCs)
  • Kick Down Switch, Replacing
    • Notes
    • Removal
    • Installation
    • Checking Diagnostic Trouble Codes (DTCs)
  • Lock Function, Replacing
    • Removing
    • Installing
  • Oil Temperature Sensor, Replacing
    • Preparations
    • Removing The Cable Harness
    • Removing The Sensor
    • Installing, Adjusting & Checking
      • Installing The Sensor
    • Installing The Gear-Shift Position Sensor
      • Notes
      • Adjusting & Checking
    • Installation
    • Installing Engine Compartment Components
    • Checking Diagnostic Trouble Codes (DTCs)
  • Sealing Ring For The Gear Shift Linkage Rod
    • Special Tools
    • Preparations
    • Removing The Gear-Shift Position Sensor
    • Removing The Sealing Ring For The Gear Shift Linkage Rod
    • Installing, Adjusting & Checking
      • Installing The Sealing Ring
    • Installing The Gear-Shift Position Sensor
      • Notes
      • Adjusting & Checking
    • Installation, Continued
    • Installing Engine Compartment Components
    • Checking Diagnostic Trouble Codes (DTCs)
  • S & W Mode Selectors, Replacing
    • Removal
    • Installation
    • Check Diagnostic Trouble Codes (DTCs)
  • Speed Sensor, Replacing
    • Preparations
    • Replacing The Sensor
    • Installing Components
  • Solenoids, Inspection/Replacement
    • Special Tools
    • Opening Control System
    • Preparations
    • Checking Resistance
    • Readings, Solenoids
    • Replacing Solenoid
    • Installing Components
    • Filling & Checking Oil
    • Checking Diagnostic Trouble Codes (DTCs)
  • Throttle Cable, Replacing
    • General
    • Removing The Throttle Cable
    • Remove From The Engine Compartment:
      • Notes
      • Automatic Transmission From Model Year 98:
    • Remove From The Passenger Compartment:
    • Installing The Throttle Cable
      • Engine Compartment:
      • The Passenger Compartment:
    • Checking & Adjusting The Throttle Pulley & Throttle Cable
  • Transmission Cable, Replacing
    • Removing Engine Compartment Components
      • Removing The Battery And Air Cleaner (ACL)
      • Disconnecting The Transmission Cable
    • Removing Passenger Compartment Components
      • Removing The Rear Center Console
      • Removing The Front Center Console
      • Removing The Front Center Console, Continued
    • Removing The Transmission Cable
      • Disconnecting Within The Gear Selector Assembly
      • Removing The Transmission Cable
      • Installing The Gear Selector Cable
    • Installing Center Consoles
      • Installing The Front Center Console
      • Installing The Rear Center Console
    • Finishing
      • Adjusting The Transmission Cable, Installing Engine Compartment Components
  • Transmission Control Module (TCM), Replacing
    • Information
    • Removing The Control Module
    • Installing The Control Module
    • Adapting The Throttle Position (TP) Signal