Troubleshooting (Security System And Locks System)

• Locks, Latches And Entry Systems
  • Notes
  • Principles of Operation
    • Power Locks
    • Smart Unlock
    • Remote Transmitter
    • Remote Transmitter Lock/Unlock Control - Unlock
    • Remote Transmitter Lock/Unlock Control - Lock
    • Panic Alarm
    • Anti-Theft - Perimeter Alarm System
  • Inspection and Verification
  • Smart Junction Box (SJB) Diagnostic Trouble Code (DTC) Index
• Symptom Troubleshooting Chart - Power Door Locks/Keyless Entry Remote Transmitter
• Pinpoint Test 1: All Door Locks Are Inoperative
  • Normal Operation
  • Possible Causes
• Pinpoint Test 2: All Door Locks Are Inoperative From One Switch
  • Normal Operation
  • Possible Causes
• Pinpoint Test 3: A Single Door Lock Is Inoperative
  • Normal Operation
  • Possible Causes
• Pinpoint Test 4: The Door Locks Operate Only One Way
  • Normal Operation
  • Possible Causes
• Pinpoint Test 5: The Doors Do Not Lock/Unlock Using The Keyless Entry Remote Transmitter
  • Normal Operation
  • Possible Causes
• Pinpoint Test 6: Remote Keyless Entry Transmitter Out Of Synchronization
  • Normal Operation
  • Possible Causes
• Pinpoint Test 7: Panic Feature Is Inoperative/Does Not Operate Correctly
  • Normal Operation
  • Possible Causes
• Pinpoint Test 8: The Remote Transmitter Has Poor Range Performance
  • Normal Operation
  • Possible Causes
• Pinpoint Test 9: The Smart Lock Does Not Operate Correctly
  • Normal Operation
  • Possible Causes
• Anti-Theft - Passive Anti-Theft System (Pats)
  • Notes
  • Principles of Operation
    • Notes
    • Anti-Scan Feature
  • Inspection and Verification
    • Notes
    • PCM Diagnostic Trouble Code (DTC) Index
    • Expanded DTC Descriptions
• Symptom Troubleshooting Chart - Anti Theft-Passive Anti-Theft System (Pats)
• Pinpoint Test 1: Antenna Not Connected
  • Normal Operation
  • Possible Causes
• Pinpoint Test 2: Pats Ignition Key Transponder Signal Is Not Received
  • Normal Operation
  • Possible Causes
• Pinpoint Test 3: Pats Received Incorrect Key-Code From Ignition Key Transponder
  • Normal Operation
  • Possible Causes
• Pinpoint Test 4: Pats Received Invalid Format Of Key-Code From Ignition Key Transponder
  • Normal Operation
  • Possible Causes
• Pinpoint Test 5: Pats Transceiver Module Signal Is Not Received
  • Normal Operation
  • Possible Causes
• Pinpoint Test 6: Anti-Theft Number Of Programmed Keys Is Below Minimum
  • Normal Operation
  • Possible Causes
• Pinpoint Test 7: The Vehicle Does Not Start - The Anti-Theft Led Proves Out Normally
  • Normal Operation
  • Possible Causes