Section 171 (Conventional Brake System)
WARNING: This page is about a different car, the 2025 Mazda CX-5. However, it is still accessible from the selected car via links, so may be relevant.
- Brake Fluid Air Bleeding
- Brake Fluid Inspection
- Brake Fluid Level Sensor Inspection
- Brake Pedal Inspection
- Brake Pedal Removal/Installation
- Brake Switch Inspection
- Conventional Brake System Location Index
- Front Brake Caliper Disassembly/Assembly [With 2-Piston Floating Caliper]
- Front Brake Caliper Disassembly/Assembly [With Single Piston Floating Caliper]
- Front Brake Caliper Removal/Installation [With 2-Piston Floating Caliper]
- Front Brake Caliper Removal/Installation [With Single Piston Floating Caliper]
- Front Brake Disc Pad Removal/Installation [With 2-Piston Floating Caliper]
- Front Brake Disc Pad Removal/Installation [With Single Piston Floating Caliper]
- Front Brake Disc Removal/Installation [With 2-Piston Floating Caliper]
- Front Brake Disc Removal/Installation [With Single Piston Floating Caliper]
- Front Brake Hose Removal/Installation [With 2-Piston Floating Caliper]
- Front Brake Hose Removal/Installation [With Single Piston Floating Caliper]
- Front Brake Inspection
- Brake Judder Repair Hints
- Description
- Steering wheel vibration
- Floor vibration
- Brake pedal vibration
- Due to an excessive runout (side-to-side wobble) of the disc plate, the thickness of the disc plate is uneven
- The disc plate is deformed by heat
- Due to corrosion, the thickness and friction coefficient of the disc plate change
- Inspection and repair procedure
- Lateral runout inspection
- Thickness variation inspection
- Disc Plate Thickness Inspection
- Disc Pad Thickness Inspection
- Brake Judder Repair Hints
- Front Brake Mounting Support Removal/Installation [With 2-Piston Floating Caliper]
- Front Brake Mounting Support Removal/Installation [With Single Piston Floating Caliper]
- Master Cylinder Removal/Installation
- Power Brake Unit Inspection
- Power Brake Unit Removal/Installation
- Power Brake Unit Vacuum Sensor Removal/Installation
- Rear Brake Caliper Disassembly/Assembly
- Rear Brake Caliper Removal/Installation
- Rear Brake Disc Pad Removal/Installation
- Rear Brake Disc Removal/Installation
- Rear Brake Hose Removal/Installation
- Rear Brake Inspection
- Brake Judder Repair Hints
- Description
- Steering wheel vibration
- Floor vibration
- Brake pedal vibration
- Due to an excessive runout (side-to-side wobble) of the disc plate, the thickness of the disc plate is uneven
- The disc plate is deformed by heat
- Due to corrosion, the thickness and friction coefficient of the disc plate change
- Inspection and repair procedure
- Lateral runout inspection
- Thickness variation inspection
- Disc Plate Thickness Inspection
- Disc Pad Thickness Inspection
- Minimum Rear Disc Pad Thickness
- Brake Judder Repair Hints
- Rear Brake Mounting Support Removal/Installation
- Vacuum Hose Removal/Installation [VIN M]
- Vacuum Hose Removal/Installation [VIN L]
- Vacuum Hose Removal/Installation [VIN Y]
- Vacuum Line Inspection [VIN M]
- Vacuum Line Inspection [VIN L]
- Vacuum Line Inspection [VIN Y]
- Vacuum Pump Inspection
- Vacuum Pump Removal/Installation [VIN M]
- Vacuum Pump Removal/Installation [VIN L]
- Vacuum Pump Removal/Installation [VIN Y]