Manual Trans: Overhaul

• General
  • Special Service Tools
  • Symptom Related Diagnostic Procedures
  • Specifications
  • Structural View
  • Cross-Sectional View
  • Power Flow
• On-Vehicle Service
  • Oil Inspection
  • Oil Change
  • Oil Seal Change
• Disassembly
  • Notes
  • 5TH/Reverse Gear And Housing Parts
    • Notes
    • PREINSPECTION
      • 5th GEAR THRUST CLEARANCE
    • Lock Nut
    • Shift Fork And Shift Rod Assembly
  • Clutch Housing And Transaxle Case Components
    • Notes
    • Disassembly Note
      • Bearing Outer Race (Primary Shaft Side)
      • Reverse Lever Shaft
      • Oil Seal (Change Rod)
      • Funnel And Bearing Outer Race (Secondary Shaft)
      • Oil Seal (Primary Shaft)
      • Oil Seal (Differential)
      • Bearing Outer Race (Differential)
      • Bearing Outer Race And Adjust Shim (Differential)
      • Oil Seal (Speedometer Gear Case)
    • Assembly Note
      • Transaxle Case Oil Seal (Differential Side)
• Reassembly
  • 5TH/Reverse Gear And Housing Parts
  • Primary And Secondary Shaft Assembly
    • Notes
    • Shift Fork And Shift Rod Assembly
    • Crank Lever Assembly And Crank Lever Shaft
    • 5th/REVERSE SHIFT ROD END AND 5th/REVERSE SHIFT ROD
    • Reverse Idle Gear And Reverse Idle Shaft
    • Transaxle Case Assembly
    • SECONDARY 5th GEAR
    • 5th/REVERSE CLUTCH HUB ASSEMBLY AND 5th/REVERSE SHIFT FORK
    • Lock Nut
  • Assembly Note
    • Oil Seal (Differential)
    • Bearing Race (Differential)
      • Notes
      • Diaphragm Spring On Primary Shaft
    • Bearing Race (Transaxle Case)
    • Oil Seal (Change Rod Assembly)
    • Boot (Change Rod Assembly)
    • Oil Seal (Primary Shaft)
  • PREASSEMBLY Bearing Preload & Adjustments
    • Notes
    • Final Assembly Bearing Preload
• Components
  • Input Shaft
    • Primary Shaft Assembly
    • PREINSPECTION
      • 3rd GEAR THRUST CLEARANCE
      • 4th GEAR THRUST CLEARANCE
    • Disassembly Note
      • BEARING (4th GEAR END)
      • 3rd/4th CLUTCH HUB ASSEMBLY, 3rd SYNCHRONIZER RING AND 3rd GEAR
    • Reassembly
      • Primary Shaft Assembly
    • Assembly Note
      • BEARING (1st GEAR END)
      • PRIMARY 3rd GEAR, 3rd SYNCHRONIZER RING AND 3rd/4th CLUTCH HUB ASSEMBLY
      • 4th SYNCHRONIZER RING, PRIMARY 4th GEAR AND BEARING (4th GEAR END)
  • Output Shaft
    • Secondary Shaft Assembly
    • PREINSPECTION
      • SECONDARY 1st GEAR THRUST CLEARANCE
      • SECONDARY 2nd GEAR THRUST CLEARANCE
    • Disassembly Note
      • BEARING AND SECONDARY 4th GEAR
      • SECONDARY 3rd GEAR AND SECONDARY 2nd GEAR
      • 1st/2nd CLUTCH HUB ASSEMBLY, 1st SYNCHRONIZER RING, AND SECONDARY 1st GEAR
      • Bearing (Differential Drive Gear End)
    • Inspection
      • Notes
      • Gears
      • Synchronizer Ring
      • Clutch Hub Assembly
      • Reverse Idle Gear And Reverse Lever
      • Bearing
      • Primary Shaft And Secondary Shaft
      • Vehicle Speed Sensor (Speedometer Driven Gear)
    • Reassembly
      • Precaution
      • Secondary Shaft Assembly
    • Assembly Note
      • Clutch Hub
      • Bearing (Differential Drive Gear End)
      • SECONDARY 1st GEAR, 1st SYNCHRONIZER RING AND 1st/2nd CLUTCH HUB ASSEMBLY
      • 2nd SYNCHRONIZER RING, 2nd GEAR AND SECONDARY 3rd GEAR
      • SECONDARY 4th GEAR AND BEARING
  • Differential
    • Notes
    • PREINSPECTION
      • Backlash Of Side Gear And Pinion Gear
    • Disassembly Note
      • Bearing (Ring Gear Opposite Side)
      • Side Bearing Inner Race
      • Bearing (Ring Gear Side)
    • Inspection
      • Notes
      • Ring Gear And Gear Case Assembly
      • Bearing
    • Assembly Note
      • Bearing (Ring Gear Side)
      • Bearing (Ring Gear Opposite Side)
      • Roll Pin
      • Backlash Of Side Gear And Pinion Gear
• Manual Transaxle Shift Control
  • Shift Mechanism
    • Overhaul
  • Assembly Note
    • Extension Bar
    • Spring