Engine Control System - Hybrid

• PID/Data Monitor Item Table
  • Description
  • Generic OBD PID List
• PID/Data Monitor Reference Value (2.3L)
  • Notes
  • Typical Diagnostic Reference Values (2.3L)
• PID/Data Monitor Reference Value (3.0L [4V])
  • Notes
  • Typical Diagnostic Reference Values (3.0L [4V])
• Reference Values
  • Reference Value Symptom Chart
    • Notes
    • Symptom Chart
  • Reference Value PID/Measured Signal Chart
  • Typical Diagnostic Reference Values
  • 2.3L 4V Tribute Hybrid
    • Notes
    • Typical Diagnostic Reference Values
    • Transaxle Connector C1458A
    • Transaxle Connector C1458B
• Freeze Frame Charts
  • Notes
  • Freeze Frame Data Table
• Electronic Engine Controls
• Pcm Programming - Ids
  • Programmable Module Installation (PMI) Using the Integrated Diagnostic System (IDS) When the Original Module is Available
  • Programmable Module Installation (PMI) Using the Integrated Diagnostic System (IDS) When the Original Module is NOT Available
• Powertrain Control Module (Pcm) - 2.3L Removal/Installation
  • Notes
  • Removal
  • Installation
• Powertrain Control Module (Pcm) - 3.0L (4V) Removal/Installation
  • Notes
  • Removal
  • Installation
• Mass Air Flow (MAF) Sensor - 2.3L Removal/Installation
• Mass Air Flow (MAF) Sensor Removal/Installation - 3.0L
• Camshaft Position (CMP) Sensor - 2.3L Removal/Installation
• Camshaft Position (CMP) Sensor - 3.0L (4V) Removal/Installation
• Crankshaft Position (CKP) Sensor - 2.3L Removal/Installation
  • Notes
  • Removal
  • Installation
• Crankshaft Position (CKP) Sensor - 3.0L (4V) Removal/Installation
• Throttle Position (TP) Sensor - 2.3L Removal/Installation
• Throttle Position (TP) Sensor Removal/Installation - 3.0L
• Cylinder Head Temperature (CHT) Sensor - 2.3L Removal/Installation
• Engine Coolant Temperature (ECT) Sensor - 3.0L (4V) Removal/Installation
• Fuel Rail Pressure And Temperature Sensor - 2.3L Removal/Installation
• Fuel Rail Pressure And Temperature Sensor Removal/Installation - 3.0L
• Idle Air Control (IAC) Valve - 2.3L Removal/Installation
• Idle Air Control (IAC) Valve Removal/Installation - 3.0L
• Heated Oxygen Sensor (Ho2S) And Catalyst Monitor Sensor - 2.3L Removal/Installation
• Heated Oxygen Sensor (Ho2S) And Catalyst Monitor Sensor Removal/Installation - 3.0L
• Knock Sensor (KS) - 2.3L Removal/Installation
• Clutch Pedal Position (CPP) Switch Removal/Installation